My dog got TPLO done in both rear legs. They did them one at a time so she could walk on three legs while the surgical leg healed. The surgeon did a very good job and there weren’t any serious complications. The hardest part was convincing her not to get on the couch during recovery. It also cost us about $8k USD for both legs combined.
I sometimes wonder why anything is wrapped in plastic at all. So many products are wrapped in plastic for seemingly no other reason than to indicate that it’s unopened.
Is this what the bridge of the castle looks like when Riff Raff and Magenta take off?
Old Sega consoles like that probably need their electrolytic capacitors replaced. I’d say like 80% of non-working Sega consoles I’ve had just needed the caps replaced.
You might have trouble getting free unrestricted library cards if you don’t live in the area that the library serves. They are usually paid for with taxes and aren’t there to serve people outside their community.
If you’re willing to pay for it, I know that the Ottawa Public Library in Canada offers membership for $90/year to people living outside Ottawa. You may find something similar at other libraries.
The Libraries and Archives of Canada will issue a card too, but you have to visit the archives in person and have a reason you are using the archives and not another library.
I’m no fence installer or anything so I don’t know if it’s possible, but instead of replacing the fence, could the chain link part be removed from the posts and flipped over and reinstalled?
That depends on your goal. If you want something free, open source and self-hosted then Plex isn’t the best option and you’d do better to look at Jellyfin or Kodi.
Make sure you’re buying 14/2 or 12/2 that has a ground wire and running that back to the breaker box. I saw the job you did with the big cable in the floor and it didn’t look like you ran a new cable that had a ground wire. It’s best to replace the old shoddy stuff with circuits that are up to code, even if you’re doing it DIY and your area doesn’t require homeowners to get it inspected. The codes are designed to prevent fires and loss of life.
You can mark it either red or black, but you already have one black wire, so it would be best to mark it red, just to differentiate it.
Since you went with 10/2 for a 240v outlet that means your cable will have two hots and a single ground. But the cable you bought will have a black, white and bare/green wire. Make sure that you wrap both ends of the white conductor with red electrical tape to indicate that it is also a hot wire. White normally indicates a neutral, but since you won’t have a neutral wire in this cable, it’s important to mark it. Otherwise someone else may work on this outlet in the future, see a white wire, assume it’s a neutral, wire something up with it as a neutral, and give themselves a pretty bad shock.
If you’re in North America, which I assume you are based on the 120v wires, then your assumption about 240v power is a bit off. Both wires can be a hot (120v) wire, 180° out of phase from each other, so they add to 240v. In this case, a neutral wire isn’t necessary to carry the current back, the other hot wire does that. A neutral wire may be used, but then there would be 4 wires.
The ground wire and the neutral wire actually connect to each other in the panel, but it’s not safe to use a ground wire in place of a neutral, so definitely don’t wire it to the neutral on the outlet.
If you are unsure of what’s going on with this set of wires, you should really call an electrician to help. Wiring a standard 120v outlet is something a homeowner can do, but identifying an old 240v cable on a dubious circuit is definitely something a qualified electrician should do.
The model doesn’t really matter. The Japanese ones tend to be a bit easier to get for a good deal.
I use mine for an Action Reply (basically a Game Shark) and it lets me play North American games on my Japanese console.
Don’t AI models need to be trained on the material they are trying to emulate?
They are saying the husband gets his income from being a sandwich artist and the wife’s income comes from a rebate on purchasing a heat pump.
Not every package that comes with xfce has a name that starts with xfce4, just most of them do. You may need to identify and remove other packages too.
I think the meme is referring to the first vowel.
I think that: sudo apt purge xfce4* sudo apt autoremove
should do it.
I’ll point out that the other answers here are also correct. It depends on how you want to clean it from your system.
“apt remove” will only remove the packages, not the config files
“apt purge” will remove the packages and config files
“apt autoremove” will clean up the orphaned dependencies
“xfce4” will only remove the DE
“xfce4*” will remove the DE and most of the other packages that come with xfce
I think Lower Decks would be difficult to not get a 100%. 4 of 8 starring cast members are women.
Sega worked with Microsoft a bit on the Dreamcast and tried to get Microsoft to offer backwards compatibility for the Dreamcast on the Xbox. It kind of makes you wonder if Microsoft copied Sega’s controller.