This is buried toward the bottom of the release notes so I’m bringing it up here:

Added instance-level default sort type

Any admins out there considering changing their instance sort settings or asking people on their instance if they’d like this changed, given that we can individually set sorting anyway? Taking into account the inclination of people to never adjust default settings (I remain deeply curious about this tendency, as an aside), I think it might be worth at least bringing up to one’s instance community.

If they decide they want it to remain the same, all good, and even better, it raises some people’s awareness that they can change it themselves.

I think while some of this may be people being people (i.e. tendency to only discuss issues/problems vs accomplishments/solutions), I think there’s also a technical element to it as well in Lemmy’s case.

Up to the latest release of Lemmy (as of writing this is v0.19.4), admins couldn’t adjust the default sort setting, which was Active. Read the docs on the sort setting and Active does what it says, surfaces those posts with recent commenting activity (taking into account score as well).

So you get this unfortunate mix of: people gravitate to discussing negative stuff, people tend not to change default settings (since despite defaults being Active, we can change these if so inclined), and the default sort settings surface whatever is being most discussed/commented on, resulting in this sort of negativity feedback loop you’ve observed.

I noticed and posted about this a few months ago, have tried to upvote and comment on less negatively-focused posts occasionally, but I think this may be an interesting example of a small scale systemic issue as it takes more of us doing similar to address what’s being encountered. However, as more instances update to v0.19.4, I’ll be interested in seeing if admins decide to switch away from the Active sort setting to try to address this in their own way.

I don’t know what sort setting may be better for instances to run with instead, but I’m glad they now have the option. In the meantime I think it’s worth reminding people that they currently have the option to change their default sort settings to something different to try to see different kinds of posts. Personally I switch between New and Scaled to see a variety of posts beyond many of the regular doom and gloom posts.

Appreciate the adjustments and responsiveness! Gave it another try after this and the different formatting hit the spot! Still need to use more to see more finely tuned results, but dig the idea.

Also as others have already said plenty, would be cool to see this cleaned up for an open source release. If you’d like to see how some others are handling a sorta similar idea but with RSS feeds, you might look to Nunti for ideas on how to approach it.

Little feedback on the UI from taking a peek at this.

When I went into settings and adjusted post display style from card to anything else, it wasn’t clear to me that this wouldn’t apply to the new For You feed, which left me confused and less inclined to use it. I still gave it a try to make sure I wasn’t missing anything and to see how much the feed seemed to change with some light interaction, but I think you’d need to use it more than I did to see an effect.

Problem being: display settings not applying to the For You feed means I’m not going to use it much with the default card view.

Second part is that there was some comment display lag as I looked through posts, so if I looked at a post about cats with cat-related comments, those comments would linger and appear for a moment under a different post about possums. It’s just long enough to be noticeable, so thought it worth mentioning.

Huh. I had to take a quick glance at the timestamp of this article to make sure it wasn’t old, as this was the same issue that inspired a short-lived fork a few years ago.

I get where this article’s coming from, as I got where the people trying to fork it under a different name were too, however for better or worse I think what matters even more to people is that the software works well and has a good UX. If I remember right, I think Glimpse intended to focus on improving the UX but it didn’t last long enough to do much in that regard.

Better than my memory though, here’s an article that gives some insight into what went into the cessation of its development.

In the worst case they don’t get anything at all 😬

Seeing as this thread is still active, instead of continuing to reply to people throughout, gonna go ahead and put this out here.

If you’re not finding an active community for something (safe for work, that is) or any community whatsoever for your interest, you’re welcome to post about the topics that interest you in [email protected] till you find enough likeminded people to get a separate community going. This was always allowed tbh, but I’ve tried to make it more explicit and clear that it’s cool.

You’re welcome to post about papers and discuss them over in [email protected] to try to get this going for more specific communities!

You might give the programming.dev instance a try for the first couple subjects, as they have an open [email protected] community that may work for them.

Given the absence of specific communities (or active ones so far), if people would like they could start these conversations over in [email protected].

I recognize it’s not the same, particularly for getting to those deep dive points you mention with ATLA, but gotta start somewhere, right?

Also I can easily give this go-ahead being one of the mods there. Up to now I’ve hesitated popping into threads like this and pointing people there because I’m not a fan of consolidation, but it’s become apparent some simple meeting area may help to get more niche communities spun off and going.

Brings to mind this NSFW ('cause light horror) short film “Circles”

You might try different media if you haven’t already, as in, instead of pencil/pen and paper, maybe colored pencils or markers. Maybe even try getting some black paper and trying to draw with white color pencils instead.

I’m sure you may have tried a variety of things over the years, so I’m just spitballing, but also if you’re trying to dive into the deep end with more complex drawings, you might revisit and really hone the fundamentals. Fundamentals being like getting clean lines by practicing drawing those over and over till you can get a nice, sharp line (which often isn’t a single pencil/brush stroke!).

Once you have those down you may move on to the simple shapes, squares, triangles, circles, and try to recognize how those are put together for more complex forms. It’s a tough skill to get down, without a doubt (I’m not some proficient artist personally), but it’s just that: a skill that takes not only practice but learning methodologies. One of the toughest parts with drawing is that there’s so many methods to go about it to figure out which helps you improve.

Jungle is a plant metropolis

when you get cc’d on an email and wait till the right moment to send the CharCoal image you’ve had waiting for this moment

Original article: https://www.reuters.com/world/biden-whats-happening-gaza-is-not-genocide-2024-05-20/

It’s pretty clear to me Biden’s trying to thread the needle on this in a gruesome way. The argument seems to follow the form of: civilian deaths are collateral damage, this is unfortunate but this is war and they are not purposely being targeted and so this is not genocide.

However that almost willfully ignores the denial and blocking of aid to the same affected civilians, which is a deliberate action that despite the cover story being to prevent it reaching Hamas, falls entirely flat as regardless, it results in direct suffering and death of the civilians. I say almost because some small efforts have been made to push back against the denial of aid, but as is evident to anyone monitoring the situation, these efforts are all far too small to address the widespread suffering and death of the Gazan people.

This whole semantics game around genocide is simply disgusting. You know those in government know exactly what people mean when they’re calling it that, they want an end to the killing and an end to the deaths of civilians, whether from military strikes or denial of aid.

Once I thought and did the thing then realized the thought was the thing to do and then it kept going and going and…

bummer, an ent using comms tech despite the classic trait of’em being against exploitative civilization didn’t click as much as I thought it might

more fun imagery for me! In my head it’s a clear visual of a cross between solar and cyberpunk. Then again, I don’t remember ents in Shadowrun, but people play the TTRPG a little fast and loose like D&D, so I stand by my OP thought

oh, uh, for those unfamiliar: Shadowrun’s a tabletop RPG as well as a computer RPG with a cyberpunk setting but with fantasy creatures and magic mixed together

At a glance this sounds even more intrusive than it’s been with Win10 (and maybe 11?), and sadly it’s no surprise as even without AI junk, I think the defaults with Win10 (and maybe 11) are to track your PC use to try to provide some “convenience” features, e.g. display of recently used programs/accessed files when you go to open a new desktop (Win key + Tab).

If they would be more transparent about this and indicate whether and how much of that info, “anonymized/depersonalized” or not, is being taken by them, I think people would still be understandably annoyed but more understanding; at least with an easy opt out or better still, the default being that you must opt in for any of it.

I don’t know the specifics of what may have happened with Lemmy.film, so we’ll have to see if someone else may know.

As to what happens to posts to “their” communities, my rough understanding is that with the host server gone, federation either doesn’t occur or maybe attempts to reach the host but simply stops after some number of attempts. Upon failure I think it simply collects the posts on your home server/instance’s copy of the community.

Not sure what would happen if a new instance was spun up of Lemmy.film either from a backup or in general, but I’d imagine there’s some settings/adjustments that may be calibrated to prevent it getting a backlog of posts dumped on it causing it to get bogged down or crash.

As to questions specifically about the Lemmy software, you may try [email protected] or [email protected], think either one would be okay for this.