Depending on what method of suspend you are employing, it could be due to lack of sufficient swap space. That’s a common problem.

Without more info this is a good best guess. However, Instead of the graphics card I would suspect an undersized swap space to support hibernation.

Learned about the importance of trailing slashes in rsync by using the -delete flag.

Ableton’s Push 3 standalone runs Linux too. Same gripe about their DAW as well.

Happy to help. As I have it configured, my local network is set to prefer direct play, so any transcoding gets done from connections that traverse the boundary of my network. If you don’t live with your parents this would likely apply.

Transcoding may also occur when you have subtitled content and I believe for certain audio formats, but the transcoding would be limited to the audio track.

No worries. I got a beelink S12, non-pro model with 8G RAM and 256G SSD. It was on sale for about $150 USD. Fit my use case, but maybe not yours, although you might be surprised. Perhaps those extra plex share users won’t be concurrently transcoding?

The drives are all USB, the portable type that requires no power source. Like you, I don’t need much. I have ~12T across 3, with a small hub that could provide more ports in a pinch. This model I believe also provides a SATA slot for a 2.5” drive, but I haven’t used it. All of these drives were previously connected to a rpi 3B+, haha!

The drive shares are done via samba and also syncthing. I have no need for a unified share via mergerfs, but I did take a look at this site for some ideas. I’m the type that rolls all their own services rather than using an NAS based distro. Everything is in an ansible playbook that pushes out my configs and containers.

Edit: I should make it clear the NAS is for other systems to access the drives. Drives are directly connected via USB. All my services are contained in this single host (media/backup/microservices/etc). My Pi’s are now clustered for a k3s lab for non critical exploration.

I’m a bit of a minimalist who designs for my current use with a little room to grow. I don’t find much value in “future proofing” as I’ve never had much success in accomplishing that.

You may want to consider a mini PC. That was my upgrade after torturing my raspberry pi for many years. I landed here after agonizing over building the perfect NAS media server. Still very low on power consumption, but the compute power per dollar is great these days. All this in only a slightly larger form factor over the pi. I brought over the drives from the pi setup and was up and running for a very low cost. The workload transferred from the pi (plex, NAS, backups, many microservices/containers) leaves my system extremely bored where the pi would be begging for mercy.

I don’t do a lot of transcoding, so I’m no expert here, but looking at the documentation I believe you would want a passmark score of 2000 per each 1080p transcode, so 8000+ for your 4+ streams, not including overhead for other processes.

Edited my response to be more helpful.

If you’re not opposed to it, it’s in the AUR.

Edit: Sorry a more helpful answer is that you can likely find it in manjaro’s add/remove software application. Optionally, From the command line you would execute pamac search syncterm if it exists pamac install syncterm

Here’s the documentation for enabling AUR: https://docs.manjaro.org/activating-the-aur-and-building-packages-with-pamac/

Lived through the 90s when the import car scene was huge. The term ricing back then was used when referring to asians who modified their cars, as a pejorative.

It really bummed me out to see it creep into the Linux community. Tried voicing displeasure back when I used Reddit and got blasted with downvotes and really distasteful comments, felt like I was alone in this feeling. Thanks, from some random Asian Linux user.

More recently, The Dø there is something really special about this performance. This version of Hangover is much better than the recorded version in my opinion.

All of the Blogotheque videos are pretty incredible, something for almost anyone to find compelling.

This is it. It’s not the worlds most well written book, but its repetitiveness and concepts are effective. Worked for me.

What distro do you use at work? Using that at home would benefit you professionally as well. I’d start there unless it’s redhat.

I like restic, haven’t seen it mentioned yet.

Voyager, mostly because it’s similar to Apollo, a very popular app for Reddit, in many ways. As I was an Apollo user, it is nice to have some of the features replicated.

You should be able to do wildcards with acme V2 and a dns challenge: https://community.letsencrypt.org/t/acme-v2-and-wildcard-certificate-support-is-live/55579

You would manage internal dns and would never need to expose anything as it’s all through validation through a TXT record.

You could use also something like traefik to manage the cert generation and reverse proxying:

https://doc.traefik.io/traefik/https/acme/

I’m going go against the grain and recommend a spinning disk for your situation. Writing backups and serving files will likely be overkill with and ssd. Depending on your version of pi you might even saturate the USB bus before you get anywhere near the speed your ssd provides. I’ve been using WD 2.5” spinners on a pi for the very purposes you describe for years.

Hey, I’ve been a drummer for over 30 years. When I started I got a practice pad. That was really the only option outside of a full set and it worked well. You’ll need to build your fundamentals with rudiments that you can apply on a full kit. This takes some time. That’s not to say you can’t jump into a drum set right away, but I can be a frustrating starting point and as you point out, expensive.

As a work around you can set up other objects around your pad and tap your feet to get a feel for coordination on a full set. Once you’ve made some progress and reach the level of uncontrollable tapping on random objects and air drumming day and night, it’s probably a good indicator you’re in deep and probably need to invest in something.

I will add that buying an electronic kit was the best decision I made, and I wish I had done it earlier, and not been such a purist. The main reason being, I can practice more often, and it provides a more drum like experience.

For a first pad there’s lots of options, gum rubber is a favorite, there are some multi surface pads that you may also want to try, if you want to pretend you’re playing on the worlds tiniest kit. For sticks, start with marching drum sticks or “corps” sticks and get a pair of 5A or 5Bs. Work with the corps sticks for a few months and bring in the smaller sticks to get used to those too. The larger sticks will help you build strength and are over all easier to work with. All this should be obtainable for under $100 USD.

Good luck and hope you enjoy drumming!

If I’m reading this right, ars claims that 3.0 is not limited to pro only.

https://arstechnica.com/gadgets/2023/09/contrary-to-rumors-the-iphone-15-has-a-standard-by-the-book-usb-c-port/

It’s always either /var/log, or my personal favorite some process spamming tiny files running the disk out of inodes.